Poly III Concept Arts

This drawing summarizes The Phase 1 of the concept. At this phase, total of 10 concepts(jellyfish type, droplet type, face extension type, dolphin type, whale type, fictional engineering type, shark type, tuna type, carp type, sunfish type) were first studied and then morphed in to 7 concepts. Note that the fictional engineering type was still being studied and was not drawn in this page.

This drawing summarizes the Phase 2 of the concept. At this phase, 7 concepts from previous stage was again studied and several concepts were made by mixing the strengths of each concepts. Knowledge from propulsion system research was also added. This knowledge helped to design the fictional engineering type. This concept has a relatively high-angled slop between the body and the tail for ducted fan exhaust.

Tadpole type was also introduced during this stage. This concept was derived from the geometry of internal instruments and shape of a tadpole. and

This drawing summarized the Phase 3 of the concept. At this phase, all concepts from the Phase 2 was studied and morphed in to one single concept that incorporates the strengths of each concepts. This concept includes rounded head, moderate-angled slope between tail and body for ducted fan exhaust, and generally more rounded feature for fins to prevent from fins poking children's face in water.

 
start/classes/principlesofdesign/arduinogames/poly_iii_concept_arts.txt · Last modified: 2012/03/21 20:40 by ysong
 
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki