==Group Minutes==
Please post these here:

===November 9, 2010===
Continued enclosure design:
  * Using a hose barb through the aluminum plate for the water connection
    * This could reduce the chance of coolant leakage.

Overall the new features that were mentioned as being required are:
  * Reduced vibration
  * Conventient and ease of open and closing of enclosure
  * Laser diode to aid in alignment (precise with direction of actual laser)
  * Enclosure to block light/oil/damage
  * Stand up and bolt in place
  * Keep laser tube positioned inside
  * Place for enclosure to extend to next mirror
  * Ventilation for power supply
  * Indicatior that power is on
  * Safety interlocks/key switch
  * Materials: galvanized steel, anodized aluminum, or PVC?

===November 3, 2010===
Presented new ideas that should be added to the current enclosure:
  * Triagonal stabilizer instead of hose clamps to secure the laser tube in place.
  * Legs should be added to ensure stability 
  * Vibration dampening with rubber feet or plastic inserts
  * 1/4" tolerance in laser beam alignment
  * Minimize number of axes to ensure reliable alignment


===October 20, 2010===
  * Presented on possible [[Laser Enclosure|enclosure]] types.
  * Decided to include [[Laser Power Supply|laser power supply]] in enclosure.