\\
==== ====
[[start:classes:principlesofdesign:arduinogames:air_guitar|Air Guitar Home]]
==== Potential Parts ====

===Rotary Potentiometers===
8mm Shaft, 24mm Body - Probably too big\\
http://www.allelectronics.com/make-a-store/item/LPT-10K/10K-LINEAR-PRECISION-POTENTIOMETER-6MM-SHAFT/1.html\\
\\
2mm Shaft, 8mm Body - but we can't order them individually from this site...\\
http://www.top-up.com.tw/front/bin/ptlist.phtml?Category=60652\\
\\
12mm Body, 4mm Shaft - Got them!\\
http://www.mouser.com/ProductDetail/Bourns/3382H-1-103/?qs=sGAEpiMZZMtf%252b0B15WuRJFz8HdQhyXakLnUBinkbkSo%3d\\
===Tilt Sensors===

4-way Tilt Sensor - These are on the way!\\
[[http://www.sparkfun.com/products/10313]] \\
\\
1-way Tilt Sensor: We have a few of these...not totally reliable, response delay\\
[[http://www.sparkfun.com/products/10289]] \\

===Accelerometers===
This link is for an accelerometer buying guide.  We will pick the one from here that we think best suites our needs.\\
[[http://www.sparkfun.com/tutorials/167]]\\
\\
Triple Axis Accelerometer Breakout - ADXL335: Based on the guide above, this one seems like the best choice.  On the way!\\
[[http://www.sparkfun.com/products/9269]]\\
===Transmitters===
XBee:  We will probably use these or ones that are very similar.\\
[[http://www.sparkfun.com/products/8664]]\\

===Arduino===
LilyPad System: The LilyPad Arduino and related components are designed to be sewn into fabric.\\
[[http://web.media.mit.edu/~leah/LilyPad/build/turn_signal_jacket.html]]\\