====== Sealing ======
Sealing the dye.

===== Safety =====

Gloves, goggles, and cover-ups must be worn at all times.
ONLY ALUMINUM CAN BE IN THE SEALANT TANK, NO OTHER METALS SHOULD TOUCH THE SEALANT.
DO NOT BREATHE THE FUMES.

===== Preparation =====

  - MAKE SURE THE PART IS SUFFICIENTLY RINSED BEFORE STARTING THIS PROCEDURE.  THE SEALANT TRAPS IN EVERYTHING, INCLUDING UNWANTED OILS FROM FINGERS.
  - Heat the sealant solution to 176 oF (80 oC).

===== Sealing ======

  - Place the part in the sealant for 20 minutes.

===== Rinsing =====

Rinse the part in the DI water making sure to remove all of the excess sealant.
Dry the part.  Anodization is now complete.

===== Storage of Solution =====

Keep all chemicals separate from one another.
Dispose of the sealant in a proper manner (ask Dionne).